Startech MCM110SC2 10/100 Ethernet Coventer SC
Quantity ADD TO CART

Product Description

The MCM110SC2 10/100 Multi Mode Fiber Ethernet Media Converter SC 2 km creates an economical cost - effective Ethernet - fiber link transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base - Fx optical signals to extend an Ethernet network connection over an SC terminated multimode fiber backbone.The converter supports a maximum multimode fiber optic cable distance of 2 kilometers (1.2 miles) providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber while delivering solid network performance and scalability.This versatile GbE Ethernet to Fiber converter is compatible with most 3COM Cisco Lucent and Nortel networks and fully complies with applicable IEEE 802.3 standards.Improve network scalability by increasing the distances between network points by up to 2km (Multi-mode).Compact lightweight enclosure is easily mounted or placed into any location with little to no configuration needed.Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion.Supports a maximum multi mode fiber optic cable distance of 2 km.Compatible with most 3COM Cisco Lucent and Nortel networks.Compact design.Supports transparent Q-in-Q double tagged frames.Supports Link Fault Pass through (LFP).Supports IEEE 802.1q Tag VLAN pass thru.Supports flow control (Pause).Provides switch configuration of half/full duplex transfer mode for FX port.LED Indicators for simple Ethernet/Fiber network link monitoring.Forward 9K jumbo packets in converter mode.Auto negotiation or Force 10/100 Mbps and MDI/MDI-X (Crossover for TX port).Auto detects half/full duplex transfer mode from the TX port.Manual controls for UTP mode speed Full and Half Duplex and LFP (Link Fault pass-through) on/off.Simple installation.Extend your Ethernet connection up to 2km away using fiber optics.Designed for large high speed work groups that require expansion of fast Ethernet Networks.Connect via fiber optics two or more buildings on the same campus.Connect remote sub-networks to larger fiber optic networks/backbones.Technical Specifications.Center Tip Polarity Positive.Color Black.Connector A 1 - Fiber Optic SC Female.Connector B 1 - RJ-45 Female.Fiber Operating Mode Half/Full-Duplex.Humidity 10~90% RH.Industry Standards IEEE 802.3 10Base-T.Industry Standards IEEE 802.3u 100Base-FX.Industry Standards IEEE 802.3u 100Base-TX.Input Voltage 115 AC.LED Indicators 1 - Ethernet Link and Activity (ON - Ethernet Link OK Blinking - Activity on Ethernet Link).LED Indicators 1 - FEF (Far End Fault)(On - Fault Detected Off - No Fault.LED Indicators 1 - Fiber Link and Activity (On - Fiber Link ok Blinking - Activity on Fiber Link).LED Indicators 1 - Full ( Full duplex / Half duplex).LED Indicators 1 - Power.LED Indicators 1 - Speed (Off - 10Mbps On - 100 Mbps).Max Transfer Distance 2 km.Operating Temperature 0C to 50C (32F to 122F).Output Current 200mA.Output Voltage 12 DC.Plug Type M.Storage Temperature -10C to 70C (14F to 158F).Wave Length 1310nm.Maximum Data Transfer Rate 10/100Mbps.Product Height 0.79" (20 mm).Product Length 3.74" (95 mm).Product Width 2.95" (75 mm).- SKU: DHMCM110SC2

Chat about this product, ask questions, share your stories, upload pictures, and have respectful conversations. All posts here are public.
Add to the chat, reply, and engage... click here.